STEDI TYPE-X ™ PRO LED DRIVING LIGHT
- TYPE-X ™ PRO LED DRIVING LIGHT
Product Availability: In stock
Owned & Operated
For 30 Days
For Expert Advice
STEDI TYPE-X DRIVING LIGHTS
TYPE-X ™ PRO Registered Design Number 20181483
THE PRO STANDARD
You only need one glance to realise that the sky was the limit when designing the STEDI TYPE-X ™ PRO (Registered Design Number 201814836 & Registered Trademark)
Back in 2016 we released the original Type-X™ and completely disrupted the high performance driving light market. If you haven’t heard about the legendary reputation of V1.0 TYPE-X™, start by checking out the Youtube comparisons. With the introduction of our PRO Edition we are yet again redefining the auxiliary driving light category. Our all new Type-X™ PRO edition epitomises our commitment to maximising light output and reliability at levels that surpass the most respected players in the industry.
1.15KM BEAM THROW
Using the latest optic simulation modelling, the reflector geometry was tweaked over and over again to achieve a highly functional beam pattern. No doubt the attention grabber is the unrelenting beam distance of 1.155km, however the real strength of our Type-X™ PRO is in mid to long range light distribution that really sets it apart. Astonishing beam throw coupled with a homogeneous wide beam will have you insist on driving only when the sun’s down.
YOUR LIGHTS YOUR WAY.
Pink? Green? Blue? Orange? Grey or all Black? The choice is yours. We’ve designed the inner ring fasteners to be independent of the main sealing structure, allowing you to change the colour that best suits. We’ve included grey and orange in the kit to get you started, or if you prefer all black, simply don’t fit any ring at all. Our coloured filters and iconic STEDI smile covers are backwards compatible too.
Additional colours sold separately.
A WOLF IN WOLF’S CLOTHING
Forget folded steel brackets 3mm 4mm or 5mm it’s all yesterday’s news. Type-X™ PRO is all about pushing boundaries, the bracket system is a 10mm thick high pressure die-cast aluminium marvel of engineering. Ribbed in all the right places to ensure no vibration and no prospect for fatigue. Our Type-X™ PRO bracket was designed to withstand extreme and prolonged corrugations time and time again. True to STEDI’s signature design principles we’ve added brushed stainless steel shoulder plates, which will look just as comfortable on a tricked out 70 series as it will mounted to a PRO race buggy.
PROPER TESTED PHOTOMETRIC DATA
Don’t confuse our Isolux and Lumens with the baseless numbers circulating around the internet. Our published specifications are comprehensively tested by a photometric laboratory. We stand by our photometric data.
- 1 x STEDI Type-X PRO LED Driving Light
- 1 x Protective STEDI Black Out Cover
- 1 x Grey Colour Ring
- 1 x Orange Colour Ring
- 1 x Stainless Steel fastener kit
- 1 x 150mm Male Deutsch DTP With Wire Tails
|LED||37 x Oslon High-Flux LED|
|RAW LUMENS||26,270 (Pair)|
|TESTED LUMENS||15,870 (Pair)|
|AMP DRAW||10.4A @ 13.2v (each)|
|BEAM PATTERN||6 x Spread 31 x Pencil Beam|
|INGRESS PROTECTION||IP68 | Submersible up to 3m|
|COLOUR TEMP (CCT)||5700K|
|VOLTAGE COMPATIBILITY||12v & 24v|
|LUMEN MAINTENANCE||50,000 LM-80|