New Products

STEDI ST3303 PRO Light Bars – A Monster Is Born

STEDI ST3303 Pro Light Bar Unleashed

They called its predecessor “The Savage”. We’re calling this one “The Monster”. We’ve been lucky enough to get our hands on an early supply of the new STEDI ST3303 Pro Light Bar. We’re here to unbox one and show you what they are all about.

STEDI said they didn’t need to make this light bar. The ST4K and the ST3303 already provided enough light any normal person could ever want or need. But as with all good things, why stop there! The LED fanatics at STEDI insisted on designing and engineering the ST3303 Pro because “it would be freakin’ cool!”

At AutoElecOz, we understand where they are coming from. Which is why we are videoing ourselves unwrapping them like kids at Christmas!

Without further ado, we give you the STEDI ST3303 Pro LED Light Bar.

STEDI ST3303 Pro Light Bar Unboxing

STEDI ST3303 PRO Light Bar

THE ULTIMATE LED LIGHT BAR

The STEDI ST3303 Pro light bar was born out of pure indulgence rather than necessity. It’s predecessor already produced a tonne of light for as far as the eye can see. But the Pro is all about pushing the limits of LED light bar technology even further. Why not, because we can!

UNMATCHED LIGHT BAR PERFORMANCE

Unlike previous models, the new STEDI ST3303 Pro light bar uses CREE XPL HI emitters. The emitter die size on these drops from 5mm to 3mm, with a 9% increase in lumen output. The combined result is an increase in optic diameter by around 40%, leading to an enormous light volume and even greater beam throw.

DOUBLE THE POWER

What also sets the STEDI ST3303 Pro light bar apart from the pack is that to feed this enormous light volume, it requires more power. That’s why STEDI have equipped the 40 and 60 LED models with dual heavy duty power relays and a fused dual wiring harness.

The 60 LED model draws a massive 36amp at 13.6V and at 12.5V, 40amp. The extreme current draw means not only dual power cables but also two separate breathers.

For full specs of the different models, see our ST3303 Pro Light Bar comparison below.

CUSTOMISATION INCLUDED

The response to the colour customisation options of the STEDI Type-X Pro spotlights was so immense, that STEDI have adapted the same concept for the STEDI ST3303 Pros as well.

Match the look of your new light bar your vehicle colours using custom side caps. Included with your light bar is the standard orange and grey caps. There are also optional green, blue and red caps available separately as well.

STEDI ST3303 PRO REVIEWS

We’ve laid our hands on some early stock of the ST3303 Pros and customers have already adopted them with keen expectation. The feedback they’ve given us so far is nothing short of amazing. Everything from the packaging to the new look will drive true 4wd fanatics nuts.

DETAILS

  • CREE® XLamp XP-L HI undomed LEDs using CREE’s breakthrough SC5 Technology™
  • RFI and EMI suppression circuit. Guaranteed to not interfere with Radio or GPS Equipment
  • IP68 – Submersible to 3m
  • High Current Deutsch DTP-2 25A connectors
  • 32mm diameter parabolic reflectors
  • Spread and Spot beam pattern
  • 4mm thick 304 stainless steel side brackets included.
  • Cast Alloy adjustable sliding bracket included.
  • Nitto Denko™ Breather with PTFE microporous membrane
  • Very heavy-duty Smart Plug & Play ADR compliant Wiring Harness.
  • Switch, Dual Fuse, Dual Relay and HB3 and H4 Piggyback Adaptors included.

BUY STEDI ST3303 PRO

We stock the full range of STEDI ST3303 Pro Light bars. Order below for fast delivery Australia wide, or choose local pickup at checkout to get yours in person from our warehouse.

STEDI ST3303 Pro Light Bar Comparisons

SPEC11 INCH18.4 INCH23.3 INCH28.2 INCH39 INCH
LED TYPECREE XPL HiCREE XPL HiCREE XPL HiCREE XPL HiCREE XPL Hi
LED COUNT1224324060
VOLTAGE9V & 32V9V & 32V9V & 32V9V & 32V9V & 32V
CURRENT (AMPS)5.9A @13.6V11.9A @13.6V16.4A @13.6V25.3A @13.636.7A @ 13.6V
LENSOPTICAL GRADE, HARD COATED LEXANOPTICAL GRADE, HARD COATED LEXANOPTICAL GRADE, HARD COATED LEXANOPTICAL GRADE, HARD COATED LEXANOPTICAL GRADE, HARD COATED LEXAN
RAW LUMENS13,140Lm26,280Lm31,040Lm43,800Lm65,700Lm
EFFECTIVE LUMENS6,720Lm13,440Lm17,920Lm22,400Lm33,600Lm
PEAK INTENSITY360,800cd435,600cd474,721cd656,100cd919,681cd
HOUSINGA360.0 Cast face plate, extruded Aluminum heat sinkA360.0 Cast face plate, extruded Aluminum heat sinkA360.0 Cast face plate, extruded Aluminum heat sinkA360.0 Cast face plate, extruded Aluminum heat sinkA360.0 Cast face plate, extruded Aluminum heat sink
LIFESPAN50,00050,00050,00050,00050,000
FLOOD BEAM50°50°50°50°50°
SPOT BEAM
INGRESS PROTECTIONIP68IP68IP68IP68IP68
BEAM WIDTH56m89m116m128m153m
1 LUX DISTANCE375m667m689m810m959m
OPERATING TEMP-40˚C ~ +150˚C-40˚C ~ +150˚C-40˚C ~ +150˚C-40˚C ~ +150˚C-40˚C ~ +150˚C
WEIGHT1.315kg2.140kg3.725kg3.490kg5.055kg
Generated by wpDataTables

Leave a Reply

Your email address will not be published. Required fields are marked *